Table of Contents
Advertisement
3.6 REMOTE SETUP - CAMERA
3.6.1 Camera: Basic settings
This menu provides settings for general camera parameters.
Click on
to open the CAMERA setup menu:
Camera
Title
Install
Covert
Record Mode
Resolution
Record Quality
Select camera 1~4 for adjustment.
Enter a camera title (max. 16 characters).
Activate this checkbox for all installed cameras. Not installed camera channels
should be deactivated, otherwise system performance will be reserved for these not
used channels.
If this checkbox is activated, cameras will not be visible (local and remote) and for
all users with "OPERATOR" user rights. Users with "ADMIN" and "MANAGER" user
rights still can see the camera.
Select the recording mode:
Normal+Event: Continuous record (with Normal speed) and Event (Motion, contact
alarm) recording (with Event Speed)
Event Only: ERS-4 will record only events (motion, contact alarm).
Select recording resolution based on video format.
PAL:
720x576 / 720x288 / 360x288
NTSC: 720x480 / 720x240 / 360x240
Select an image quality for recording. There are five different qualities available:
25
ERS-4 Instruction Manual
Advertisement
Table of Contents
