Schedule - EverFocus ERS-4 Instruction Manual

10.6.3 Schedule

Camera: Select a number to change the schedule for that camera. Each camera can be set on a 24 hour
time block for Holiday (Hol), Other (Oth), Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed),
Thursday (Thu), Friday (Fri), or Saturday (Sat).
Time Bar: The time bar uses three different colors to distinguish each recoding mode.
Gray (No Rec): No recording during this time block.
Orange (E): Only events are recorded during this time block.
Blue (N+E): (Default) Normal and event recording during this time block.
To Set Schedule using Mouse
1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected block will
be highlighted in blue frame and the selected time bar will be highlighted by red frame.
There are 24 blocks on the time bar representing 24 hours respectively. Set a schedule start time by
clicking on a desired start time block on a time bar and clicking again to confirm it. At this time, the
selected block and all following blocks will turn gray, which means this gray time zone has been set to
the recording mode of gray (No Rec).
2. Click again to confirm, then a new number (for the new section) will show on this block and current and
all following blocks will turn to gray. This means this new gray time zone has a new record mode (No
record).
Figure 10-20 Schedule Menu-Schedule
130
ERS-4 Instruction Manual