3.5 REMOTE SETUP - EXPRESS
The EXPRESS menu allows a fast configuration of all basic parameters without going through all other
menus. This allows configuring an ERS-4 for installations with simple requirements (no alarm, no enhanced
schedule setting, no advanced network settings...) within a few minutes at one menu page only.
Click on
to open the EXPRESS setup menu:
Date
Click on the calendar icon.
Click on current date, ERS-4 will take over this date.
Time
Select hour, minutes and seconds and adjust time with the up/down arrows.
Record mode
3 recording modes are available in EXPRESS menu:
Normal+Event:
Event only:
ERS-4 will record continuously with 1 IPS and with full frame
rate at motion event.
Enter the estimated total duration of motion (per day) in hours.
ERS-4 will only record, if motion appears.
Enter the estimated total duration of motion (per day) in hours.
22
ERS-4 Instruction Manual