Table of Contents
Advertisement
Network Loss:
Log: Check box to record events in the log.
Buzzer: Check box to enable buzzer when network is lost.
Alarm Output: This will transmit a signal through one of the alarm outputs. It can be set to either "NONE"
(not active) or "1".
Output Type: Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses "Enter" key.
Transparent: Alarm output remains active until event ends.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.
Timeout Duration: The amount of time the buzzer sounds when ERS-4 stops recording. Duration
selectable from 1 to 150 seconds.
Figure 10-17 Alarm & Event Menu – Event – Network Loss
127
ERS-4 Instruction Manual
Advertisement
Table of Contents
