Table of Contents
Advertisement
Alarm Output
Output Type
Timeout Duration
Main Monitor
Input Type
Active Camera
PTZ Preset
Apply To
Save CH1...4
In case of event the output relay will switch. It can be set to either "NONE" (not
active) or "1" (relay activated) .
Output action when input contact event is triggered.
Transparent:
Timeout:
Transparent+Timeout: Alarm will reset after event ended + Timeout Duration.
Duration of event for the Output types "TIMEOUT" and
"TRANSPARENT+TIMEOUT".
Enter the event duration in the range 1 ~ 150 seconds.
Reaction of monitor output on contact event:
No Change:
Monitor keeps current display.
Full Screen:
Monitor switches to full screen view of the camera, which is
selected under ACTIVE CAMERA
Contact type:
N.O.:
Normal open, event is triggered if contact closes.
N.C.:
Normal closed, event is triggered if contact opens.
Selection of camera for full screen switching of monitor and PTZ preset position
reaction (if this function is activated).
Select camera 1~4.
If the ACTIVE CAMERA is a camera with PTZ and preset - position function, it is
possible to move the camera in case of event to a desired preset position.
OFF:
no camera movement
1~255: camera will move in case of event to selected preset position
This button can be used to copy the contact settings to other contacts. Select which
contact you wish to copy to.
"Select All" selects all contacts, "Unselect All" deselects all contacts. Click "OK" to
copy the settings or "Cancel" to exit without copying.
Clicking on this button will save the changed settings for this contact.
Alarm is active as long the event is active.
Automatic alarm reset after a defined time (Timeout
Duration)
34
ERS-4 Instruction Manual
Advertisement
Table of Contents
