Table of Contents
Advertisement
The next step is to open ports within your router. Log into the router using a PC and open the
following ports.
o Ports to open: 80, 1600
o If your Internet service provider blocks port 80, you can change it to a different port in the
DVR's Network Menu Setup.
o If you are using a Linksys or D-Link router, see Chapter 9 for basic support on setting up
ports. For any other router, you will need to contact the manufacturer for support.
To access the DVR from a computer simply open Internet Explorer and in the address bar type:
http:// (the IP address given by your internet service provider)
Note: If you changed to a different port other than 80, you will need to include this at the
end of the IP address
If you have a Dynamic IP address and have opened the ports, go to the next chapter to setup
DDNS.
7.3 LINKSYS & D-LINK PORT FORWARDING
7.3.1 Linksys Port Forwarding
This section will cover a few simple configurations for the Linksys router. This chapter is only to offer some
help to the installer and end user. Please understand we DO NOT support this product and will not give
tech support on it. If you need additional technical support on this router you must call Linksys.
To access the Web-based Utility, launch a web browser and type the Router's default IP address,
192.168.1.1, in the address bar. Then press Enter. A password request page will appear. (Non-Windows
XP users will see a similar screen.) Leave the User Name field blank. The first time you access the router,
use the default password admin. Click the OK button to continue.
99
ERS-4 Instruction Manual
Advertisement
Table of Contents
