Table of Contents
Advertisement
Record With: Recording days
ERS-4 will Auto adjust Quality and Event frame rate to match the Recording days which
user need:
According to resolution, event hours and assumption above, ERS-4 will select one set of
suitable quality and event frame rate from Changing Order 1 to 8. If ERS-4 can't match
require record days from 8 sets, it will just use the set of Changing Order 8.
Changing Order
Quality
Event Frame Rate 30
In "Schedule" mode is only the selection "Preset Settings" available (details above).
Network Type Static IP:
DHCP:
PPPoE:
use
IP-Address
Enter the IP-address of the ERS-4 in your network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Subnet Mask
Enter the Subnet mask of your network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway
Enter the address of the Gateway in your network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 1
Enter the address of secondary DNS Server in your network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 2
Enter the address of secondary DNS Server in your network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Username
Only in PPPoE mode: Enter user name of your account.
Password
Only in PPPoE mode: Enter password of your account.
Apply
Press "Apply" button to save and apply Express settings to ERS-4. The system will
automatically adjust recording frame rate according to settings. The following message
will pop up, press "Yes" to change Resolution, Recording frame rate and Quality
depending on your express setting.
1
2
3
Superior Standard Low
30
30
Fixed IP-Address, IP parameters have to be entered below.
If available, DHCP server in LAN will automatically assign IP for network
connection.
This is a DSL connection application only. Check with your ISP if they
PPPoE.
24
4
5
6
Low
Low
Low
15
10
7.5
ERS-4 Instruction Manual
7
8
Low
Low
5
1
Advertisement
Table of Contents
