EverFocus ERS-4 Instruction Manual page 138

Change the section to different mode (with different color) by clicking on the first block of each section.
The color switches from gray -> orange -> blue, every time user click the first block of a section.
3. Repeat clicking on the first block (with number on it) of any time zone, this time zone will change from
one color to another, which means switching the record mode. The color switch sequence is gray-
>orange->blue.
Schedule Setting from front panel
1. Enter schedule setting mode: press "Enter" button to enter schedule setting mode. At this time, the
whole editing area at right-down side will be highlighted within a blue frame. See below image.
2. Enter camera selection mode: Use Up/Down arrow key to switch to Camera selection mode. When
Camera selection mode is selected, all 4 cameras will be highlighted in a blue frame. See below image.
3. Selecting camera: Use Right/Left arrow key to select desired camera to configure. Selected camera
number will be highlighted by a blue frame. See above image.
4. Enter time bar editing mode: Use Up/Down arrow key to switch to time bar editing mode. When this
mode is selected, all 9 time bars will be highlighted within a blue frame.
5. Select desired time bar for setting: press Enter button, the first time bar will be selected for setting
and highlighted in a red frame. See below image. Use Up/Down arrow key to desired time bar for
setting.
131
ERS-4 Instruction Manual