EverFocus ERS-4 Instruction Manual page 50

Daytime End
SCHEDULE
TABLE
Record Type
Normal
Event
Event action
Apply
Note: All schedule settings are active only, if the check box "SCHEDULE RECORD" in
RECORD menu is activated !
in the weekend period).
End time of daytime period for each weekday (all weekdays, which are not included
in the weekend period).
Select one of the 3 modes for each time period:
Disabled: No records in this time period
Event only: ERS-4 records only events
Normal+Event: ERS-4 works with continuous and event (contact and motion
events) record
Recording frame rate for continuous record. Select a frame rate for each time
period.
Note: If recording resolution is set to 720x576 / 720 x480, maximum possible value
to frame rate is 12,5 / 15 IPS. Entering 25 / 30 IPS exceeds max. Frame rate and
will create a "Fail" message. ERS-4 will not take over the value.
Recording frame rate for event (contact and motion events) record. Select a frame
rate for each time period.
With activated check box all event related actions such as buzzer, relay out, mail
and network notification are enabled for this time period.
Uncheck the check box to block this event actions for this time period.
Click on APPLY will take over the EXPRESS settings in the schedule. You can
double-check and modify the settings at the SCHEDULE menu page.
43
ERS-4 Instruction Manual