Misc - EverFocus ERS-4 Instruction Manual

10.10.5 Misc.

Firmware
Current Firmware Version: Displays the current version.
Firmware Upgrade: Press "Upgrade" to upgrade the firmware.
NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with
the latest version of the firmware. Do not disconnect USB device or turn off the power of
the unit during the upgrade; this can cause the system to crash.
Configurations
Load Factory Default: Click "Load" to restore all menu settings to the default values. User Account,
Network Setting, and Time are not affected.
Load From USB: Click "Load" to upload saved ERS-4 configuration settings from a USB flash device.
Save To USB: Click "'Save" to save the current ERS-4 configuration settings to a USB flash device.
Language: Choose which language the ERS-4 uses. The available languages may vary based on region.
Figure 10-36 System Menu – Firmware & Misc.
151
ERS-4 Instruction Manual