Network; Lan - EverFocus ERS-4 Instruction Manual

10.7 Network

Figure 10-22 is a screen shot of the NETWORK SETTING MENU. This menu is for configuring the ERS-4
for a network connection.
NOTE: Since every Network Configuration is different, please check with your Network Administrator or ISP
to see if your ERS-4 requires specific IP addresses and/or port numbers.

10.7.1 LAN

Network Type:
Static IP: User can set a fixed IP for network connection.
DHCP: DHCP server in LAN will automatically assign IP for network connection
PPPoE: For direct connection to DSL ONLY. Verify with your ISP if they use PPPoE.
IP: This field shows the ERS-4's current IP Address. A static IP address must be set manually. If DHCP or
PPPoE is selected, this value will be assigned automatically.
Subnet Mask: This field shows the subnet mask for your network so the ERS-4 will be recognized within
the network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the ERS-4 will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 1: This field shows the primary DNS server for your network. If DHCP is selected and an
internet connection is available, this value will be assigned automatically. This field must have a valid DNS
address in order to use the DDNS feature (see 5.7.3 DDNS for more detail).
DNS Server 2: This field shows the secondary DNS server for your network.
HTTP Port: Port number for HTTP/WEB communication.
Figure 10-22 Network Menu – LAN
138
ERS-4 Instruction Manual