Camera: Video Loss - EverFocus ERS-4 Instruction Manual

3.6.4 Camera: Video Loss

This menu defines the reaction on video loss events.
Camera
Enable
Log
Pre-alarm Record
Buzzer
Email Notify
Network Alarm
Alarm Output
Output Type
Timeout Duration
Select camera 1~4 for adjustment.
Check box to enable video loss detection. Other motion options will not be available
unless this feature is selected.
Check box to record video loss events in the log.
Check box to record several seconds before the video loss event.
(Pre-alarm recording rate will follow "Normal" frame rate setting)
Check box to enable buzzer when a video loss event is triggered.
Check box to send email notification when a video loss event is detected.
Check box to send out a network alarm to client PC when video loss occurs.
(requires PowerCon software and setting up Alarm Server in Network Setup menu)
In case of event the output relay will switch. It can be set to either "NONE" (not
active) or "1" (relay activated) .
Output action when motion is triggered.
Transparent:
Timeout:
Transparent+Timeout: Alarm will reset after event ended + Timeout Duration.
Alarm output lasts for the set time duration.
Alarm is active as long the event is active.
Automatic alarm reset after a defined time (Timeout
Duration)
30
ERS-4 Instruction Manual