EUROCOM Notebook V09.1.00 User Manual page 148

Modules & Options
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up
3.75G/HSPA modem ac-
tivity.
7
7 - 40 3.75G/HSPA Module
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
Key Indicators" on page 1 -
When the 3.75G/HSPA module is powered on, the on-screen indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
page 4 - 3. Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
on
• HSPA Modem Interface - See
page 7 - 43 for driver installation information and
on page 7 - 44
• Mobile Partner - See
52 for driver installation information and
page 7 - 53 for instructions on using the Mobile Partner application.
12) to toggle power to the 3.75G/HSPA module.
"HSPA Modem Interface Installation" on
for instructions on using the HSPA Modem Interface.
"Mobile Partner Application Installation" on page 7 -
key combination (see "Function/Hot
Table 4 - 1, on
"HSPA Modem Interface"
"Mobile Partner Application" on