The Power-On Self Test (Post) - EUROCOM Notebook V09.1.00 User Manual

BIOS Utilities
BIOS Settings
Warning
Incorrect settings can
cause your system to
malfunction. To correct
5
mistakes, return to Set-
up and restore the Set-
up Defaults with <F9>.

5 - 2 The Power-On Self Test (POST)

The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to conduct a
POST, including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run Setup.
If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can't get into Setup without rebooting.