EUROCOM Notebook V09.1.00 User Manual page 271

Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
Key Indicators" on page D -
the 3.75G/HSPA module is powered on, the on-screen indicator will briefly be dis-
played. Make sure you install the drivers in the order indicated in
page D - 26. Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
• HSPA Modem Interface - See
page D - 56 for driver installation information and
on page D - 57 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See
66 for driver installation information and
page D - 67 for instructions on using the Mobile Partner application.
key combination (see
4) to toggle power to the 3.75G/HSPA module. When
"HSPA Modem Interface Installation" on
"Mobile Partner Application Installation" on page D -
"Mobile Partner Application" on
"Function/Hot
Table D - 5, on
"HSPA Modem Interface"
3.75G/HSPA Module (Win 7) D - 53
Windows 7 Information
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up
3.75G/HSPA modem ac-
tivity.
on
D