Hspa Modem Interface - EUROCOM Notebook V09.1.00 User Manual

Windows 7 Information
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see Table 1
- 6, on page 1 - 12/ Table 1
- 4, on page 1 - 9).
D
D - 56 3.75G/HSPA Module (Win 7)

HSPA Modem Interface

With the 3.75G/HSPA module and USIM card (supplied by your service provider)
installed you may then install the HSPA Modem Interface. The HSPA Modem In-
terface allows you to directly access your HSPA internet service from the computer.
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn +
on-screen indicator will indicate the module's power status). If a Found New
Hardware window appears, click Cancel in all windows that appear, and
then proceed to install the driver as below.Insert the Device Drivers & Utili-
ties + User's Manual disc into the CD/DVD drive.
2. Click Option Drivers (button).
3. Click 4.3.5 Generation Module > Yes.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Access the HSPA Modem Interface from the Start menu (Start > Pro-
grams/All Programs > HSPA modem), or by double-clicking the HSPA
modem icon on the desktop.
key combination (the