Bluetooth Module (Win 7) - EUROCOM Notebook V09.1.00 User Manual

Bluetooth Module (Win 7)

The operating system's Bluetooth Devices control panel is used to configure the
Bluetooth settings in Windows Vista, and therefore does not require a driver. Use the
Fn + F12 key combination (see
toggle power to the Bluetooth module. When the Bluetooth module is powered on,
the LED will be illuminated and the on-screen indicator will briefly be displayed.
Note that the transfer of data between the computer and a Bluetooth enabled device is sup-
ported in one direction only (simultaneous data transfer is not supported). Therefore
if you are copying a file from your computer to a Bluetooth enabled device, you will not be
able to copy a file from the Bluetooth enabled device to your computer until the file transfer
process from the computer has been completed.
Bluetooth Module & Resuming From Sleep Mode
The Bluetooth module's default state will be off after resuming from the Sleep power-saving
state. Use the key combination (Fn + F12) to power on the Bluetooth module after the com-
puter resumes from Sleep.
"Function/Hot Key Indicators" on page D -
Bluetooth Data Transfer
Windows 7 Information
Wireless Device
Operation Aboard
4) to
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F12 key com-
bination to toggle power to
the Bluetooth module, and
check the LED indicator to
see if the module is pow-
ered on or not (see
- 6, on page 1 -
- 4, on page 1 -
Bluetooth Module (Win 7) D - 31
Table 1
12/ Table 1
9).
D