Table of Contents
Advertisement
Upgrading The Computer
RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
6
Figure 6 - 4
Component Bay
Cover Screws
6 - 6 Upgrading the Hard Disk Drive(s)
Removing the Hard Disk in the Secondary HDD Bay (Model B Computers Only)
If you want to configure your hard disks in a RAID configuration then install iden-
tical drives in the primary (see page
instructions here. Follow the instructions in
Modes" on page 7 - 60
for configuration details. Note a RAID configuration is only
supported by Model B computers.
1.
Turn off the computer, and turn it over and remove the battery.
2.
Locate the component bay cover and remove screws
3.
Carefully remove the cover
2
1
3
1
Model B
11
10
2
9
6 -
4) and secondary hard disk bays as per the
"Setting Up SATA RAID or AHCI
.
12
5
4
Model B
6
7
8
3
-
.
1
11
12
Advertisement
Table of Contents
Need help?
Do you have a question about the Notebook V09.1.00 and is the answer not in the manual?
Questions and answers