Upgrading The System Memory (Ram) - EUROCOM Notebook User Manual

Upgrading The Computer
6
Figure 6 - 4
Bay Cover Screws

6 - 6 Upgrading the System Memory (RAM)

Upgrading the System Memory (RAM)
The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO-
DIMM) DDR II (DDR2) type memory modules (see
total memory size is automatically detected by the POST routine once you turn on
your computer.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws
3. Remove the bay cover
1 2 3 4
5
6 7
8
9
10
11
.
12
12
"Memory" on page C - 2). The
- .
1 11