EUROCOM Notebook User Manual page 141

Configuring an External Display using the NVIDIA Control Panel
Alternatively you can use the NVIDIA control panel to configure any attached dis-
plays.
1. Attach your external monitor to the DVI-Out Port (or TV to the 7-pin S-Video-Out
jack), and turn it on.
2. Go to NVIDIA Control Panel (see
3. Click Display, and then click Change Display configuration.
4. Choose the nView display mode you wish to use (see page
5. Select the displays you want to use (if your display is not shown click "My Display
is not shown in the list...", and choose which display is to be the primary display.
6. Click Apply > Yes to save the changes.
"NVIDIA Control Panel" on page B -
NVIDIA Video Driver Controls
2).
B - 8).
Attaching Other Displays B - 7
Function Key
Combination
You can use the Fn + F7
key combination to tog-
gle through some dis-
play options:
• Notebook Only
• External Display Only
Make sure you give the
displays enough time to
refresh.
Figure B - 5
Change Display
Configuration
B