I/O Device Configuration - EUROCOM Notebook User Manual

I/O Device Configuration

The sub-menus under this item include options to configure the Serial port A
(Serial Mouse), Serial port B (Infrared) and Parallel (Printer) port. These
can be left to the default settings, however you may wish to use certain devices
that require settings to be adjusted accordingly. Check the documentation for
any such devices to see what settings are required.
Flash Top Case Logo > I/O Device Configuration
This item allows you to enable the serial port for application programming of
the top case logo. After programming the logo make sure you reset the option
to "Disabled" (default) otherwise the serial port will not work.
Advanced Advanced
I/O Device Configuration
Flash Top Case Logo:
Serial port A:
Serial port B:
Mode:
Parallel port:
Mode:
F1 Help Select Item
Esc Exit Select Menu
PhoenixBIOS Setup Utility
Item Specific Help
Disable:
[Enabled]
Normal serial port A
[Enabled]
function.
[Enabled]
Enable:
[FIR]
Enables serial port A
for programming the top
[Enabled]
case logo image.
[ECP]
Any serial port device
will not be able to
work when this setting
is enabled.
-/+ Change Values F9
Enter Select Sub-Menu F10
Advanced Menu - I/O
Device Configuration
Setup Defaults
Save and Exit
Advanced Menu 5 - 9
BIOS Utilities
Figure 5 - 4
5