The Setup Program; Entering Setup - EUROCOM Notebook User Manual

BIOS Utilities

The Setup Program

The Phoenix Setup program tells the system how to configure itself and man-
age basic features and subsystems (e.g. port configuration).

Entering Setup

To enter Setup, turn on the computer and press F2 during the POST. The
5 prompt (Press F2 to Enter Setup) seen in Figure 5 - 1 is usually present for a
few seconds after you turn on the system. If you get a "Keyboard Error", (usu-
ally because you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combina-
tion and then hold down F2 when prompted. The Setup main menu will ap-
pear.
5 - 4 The Setup Program