Reset Configuration Data; Hyper-Threading Technology; Power On Beep; Boot Logo Screen - EUROCOM Notebook User Manual

BIOS Utilities

Reset Configuration Data:

This item is set to No as default. You can change the setting to Yes if you have
installed a new add-on which has reconfigured the system, resulting in such a
serious system conflict that the operating system is unable to boot.

Hyper-Threading Technology

Enable Hyper-Threading (it is "Enabled" by default) to increase performance
5
of your computer depending on the hardware and software you use (all the
processor options in this notebook series support Hyper Threading Technolo-
gy). Hyper Threading is supported fully in Windows XP, but it is strongly
recommended you DO NOT enable this option in other operating sys-
tems. Once you have enabled Hyper-Threading, DO NOT disable the op-
tion. (If you do disable the option you will need to reinstall your operating
system.)

Power On Beep

Use this menu to enable/disable the single beep sound at the end of the POST.
This item is "Disabled" by default.

Boot Logo Screen:

This menu item allows you to enable/disable the Boot Logo Screen as the
computer starts up (it is "Disabled" by default). This will affect what sort of
POST screen you see.
5 - 10 Advanced Menu