Section 2: Monitoring Enhancements; Monitor Set Status Lock; Monitor Source Grouping - Euphonix MixView CS3000 Software Manual

SECTION 2 : MONITORING
Monitor Set Status
3.2
Lock
monitor SET
A1•2 A3•4
Ext 1 Ext 2
Left Right
Monitor Source
3.2
Grouping
mA
F1
Euphonix CS3000/2000 MixView 3.2 Software Supplement
ENHANCEMENTS
Once you have setup a console Monitor Send, the Monitor Set Status Lock can
be used to disable all functioning of that Monitor's Set key. Each Send (A, B or
C) may be configured individually. To lock the Monitor Set keys for Monitor A,
press the A Monitor [Set] key and then [F1] (mA):
mA
A5•6 A7•8
F1
ST1 ST2
Parentheses are added to the [F1] key designator in the SmartDisplay indicat-
ing that the Monitor Set keys for Monitor A, in this example, are disabled:
Stereo Mono
(mA)
F1
Another press of the [F1] key unlocks this feature.
Monitor Source selection may be grouped. This allows a single monitor source
selection panel to be used to set sources for any or all of the three (3) monitor
outputs.
A single Source Grouping menu is shared between all three Monitors and may
be accessed from any Monitor Set key. To have Monitor B take on Monitor A's
settings, press the Monitor A [Set] key, [F4] (down arrows), [F3] (SRC) and then
[F2] (A) & [F3] (B):
-> AA -> I/C CUT
F2 F3
mA ->
F1
Simply select which monitor sources should be grouped. Subsequently, any
source selection changes made on one panel will be reflected in all other
panels in the group. In this example, Monitor A's source selection parameters
have been copied to Monitor B. Remember that the currently selected Monitor,
(mA, mB or mC), determines which parameters are used for the group.
-> AA -> I/C CUT
F2 F3
-> AA -> I/C CUT
F2 F3
mA
F4 F1
A B
F2 F3

Section 2: Monitoring Enhancements

Monitor Menu
F4
Monitor Menu
F4
DIM SRC LVL
F2 F3 F4
Source Grouping Menu
C
F4
1 - 7