Automating Linked Eqs; I/O And Dsc Status Lock; Cue Skip - Euphonix MixView CS3000 Software Manual

Automating linked EQs

I/O and DSC Status
3.2
Lock
SIDE NOTE:
Fader ON keys are only inhibited
from manual toggling. SnapShot,
Fader Linking and MIDI In controls
may still be used to toggle ON/Mute
status while Status lock is ON.

Cue Skip

3.2
Timeline approaches
cue #3 set to skip
Timeline jumps to cue #4
after reaching cue #3
Euphonix CS3000/2000 MixView 3.2 Software Supplement
When automating linked EQs, two identical automation data streams are
written separately to each of the EQs and always play back as two indepen-
dent, unlinked data streams. This means that establishing and removing links
never alters either EQ's previously recorded automation data since the actual
links are not tracked in automation. This characteristic allows links to be
established and removed during any automation pass.
I/O and DSC Status Lock disables all I/O channel [ON] keys. Additionally, all
DSC Fader Level, [ON] and [Solo] keys are also disabled. To engage the Status
Lock, press the DSC Lock key. The button will light and the key designator will
switch to "LOCK ON" for easy status identification. Another press of the key
unlocks this feature.
LOCK
ComMic
Talk
Skip PIn
F1 F2
The Skip function is used to auto-locate the master machine to the next cue in
the list. Primarily this is a live venue feature which allows automation and
audio to be played back as manually triggerable scenes. The Skip event
triggers playback to stop and locates the audio deck for the next stage cue.
Section 4: Misc Automation
Key toggles Lock On/Off
POut Off Cue Punch Menu
F3 F4
1 - 13