Table of Contents
Advertisement
Section 2: Monitoring Enhancements
Monitor Level
3.2
Linking
mA
F1
SIDE NOTE:
Linking Monitor levels does not
allow for a dB level tracking
offset between linked Monitors.
All linked Monitors track at
identical dB levels.
Source Grouping and
Level Linking Menu
Indicators
Source Grouped to Monitor A
SIDE NOTE:
It is not recommended that
Monitors be linked with circular
references such as A linked to B, B
linked to C and C linked to A.
1 - 8
Monitor Level Linking allows one or two Monitor levels to track the third
Monitor level. To have Monitor A's level track Monitor B's level, press the
Monitor A [Set] key, [F4] (down arrows) and then [F4] (LVL):
-> AA -> I/C
CUT
F2
F3
F4
mA ->
L e v e l
F1
Press [F4] (A) to cycle through all three Monitors until the designator indicates
B. Monitor A's level now tracks any Monitor B level changes. Level Tracking
can be set for each Monitor individually.
The top-level Monitor menu contains a dedicated Monitor [CUT] key and
display for both Source Grouping and Level Linking status:
mA
-> AC -> I/C
F1
The first alpha character after the first arrow indicates the Source Grouping
status for the selected Monitor. If the Source Grouping character matches the
currently selected Monitor (A = A), there is no Grouping selected for that
Monitor. Any other alpha character here indicates the Monitor to which the
selected Monitor is grouped, (C in the example above). If the Source Grouping
character is an asterisk (*), then the currently selected Monitor is grouped to
both of the other remaining Monitors.
The second alpha character after the first arrow indicates the Level Linking
status for the selected Monitor. A Monitor may only be linked to one other
Monitor. Two Monitors may be linked to the same Master (i.e., A & B linked to
C).
Euphonix CS3000/2000 MixView 3.2 Software Supplement
mA
DIM
F1
F2
f o l l o w:
B
F2
F3
F4
Level Linked to Monitor C
CUT
F2
F3
F4
Monitor A is currently Cut
SRC
LVL
F3
F4
Monitor Menu
Advertisement
Table of Contents
Need help?
Do you have a question about the MixView CS3000 and is the answer not in the manual?
Questions and answers