Electrolux ICON appliances Design Manual page 15

Full-Gas Freestanding Ranges
36" Gas Range
E36GF76HPS
Installation Specifications
• Product Weight – 352 Lbs.
• Voltage Rating – 120V / 60 Hz / 15 or 20 Amp
• Connected Load (kW Rating) @ 120 Volts = 0.6 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
• Amps @ 120 Volts = 7 Amps
• Always consult local and national electric and
gas codes.
• Range ships with 3/4" factory regulator.
• Natural gas only.
• Overhead cabinetry should not exceed a 13"
maximum depth.
• Allow 34" minimum clearance between top of rangetop
and bottom of unprotected wood or metal overhead
cabinetry.
• Absolute minimum horizontal distance between overhead
cabinets installed to either side of appliance must be no
less than maximum width of appliance.
• Allow 7" minimum clearance from edge of rangetop to
nearest combustible wall on either side of unit.
• Allow 24" minimum clearance when bottom of wood or
metal overhead cabinet is protected by not less than
1/8" flame-retardant millboard covered with not less than
No. 28 MGS sheet steel, 0.015" stainless steel, 0.024"
aluminum or 0.020" copper.
• To reduce risk of fire when using overhead cabinetry,
install vent hood that projects horizontally a recommended
minimum of 5" beyond bottom of cabinets.
e l e c t ro l u x i c o n . c o m
planning
information
For 36" model:
E36GF76HPS
Note: For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Optional
Accessories
9" Stainless
Steel Backsplash
PN # 903134-9100
Stainless Steel
Island Trim Kit
(for use in place
of backsplash)
PN # 903132-9100
4" Stainless
Steel Kick Plate
PN # 318352652
Black Knobs Kit
PN # 903108-9020
15