CD SXS Refrigerator Collar Kit (ECK23CDS)
project planning
For models E23CS78HSS & E23CS78HPS
Collar Kit (ECK23CDS) Installation
For Counter-Depth Side-by-Side Refrigerators
Installation Specifications
•
To use Collar Kit (PN # ECK23CDS), an enclosure is
required around Counter-Depth Side-by-Side Refrigerator
having an opening of 70-1/4" H x 36-1/8" W with
minimum cabinet side panels of 24-1/2" D x 1/2" W.
•
Minimum 24-1/2" depth requires recessed electrical
outlet and water line.
•
Add maximum of 1/4" to 70-1/4" opening height when
installed with frameless-style overhead cabinets, for
door opening clearance.
•
Cabinet or soffit above unit must extend out to same
depth as side panels.
•
To provide additional clearance for overhead cabinet
doors when in open position, allow 1" from underside
of cabinet to bottom of cabinet door.
•
A minimum width of 36-1/8" is required for refrigerator
install ation with an additional 1/2" or 3/4" added for
each side panel.
•
If 1/2" side panels are used, then side trim piece and
panel will be even. If 3/4" side panels are used, then 1/4"
of side panel will extend beyond collar trim and must
be finished.
•
For detailed Counter-Depth Side-by-Side Refrigerator
installation, refer to Planning Information page and
installation guide on web.
•
Collar Kit (PN # ECK23CDS) can also be used with
Electrolux ICON
®
Counter-Depth Side-by-Side
Refrigerator models E23CS75DSS, E23CS78EPS,
E23CS78ESS, E23CS78GPS and E23CS78GSS.
e l e c t ro l u x i c o n . c o m
planning
information
For models:
E23CS78HPS
E23CS78HSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
149