Table of Contents
Advertisement
CD FD Refrigerator Collar Kit (ECK23CDS)
For models E23BC78IPS_ISS, E23BC68JPS_JSS
planning
information
For models:
E23BC78IPS
E23BC78ISS
E23BC68JPS
E23BC68JSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Installation drawing shown
with designer series model
(E23BC78ISS).
148
project planning
Collar Kit (ECK23CDS) Installation
For Counter-Depth French Door Refrigerators
Collar Kit
(ECK23CDS)
Kit includes: Side/top trim pieces
and corner gussets with screws.
Collar Kit
Cutout
Dimensions
(A) 70
1
*Minimum depth from face of cabinet side panels
and requires recessed electrical outlet and water line.
Note: Refer to detailed Collar Kit (ECK23CDS) Installation
instructions included with kit or on web.
Side Trim Piece
3
/
" Cabinet
4
Side Panel
/
" Cabinet
1
Magnetic Tape
2
Side Panel
Refrigerator Case
Side Trim Piece
Side trim must be installed flush
Door Gasket
with the gasket contact surface
on the refrigerator case.
Overhead
Top Trim Piece
Cabinet Door
Top Trim Piece
1" min.
Cabinet Underside
Clearance
Refrigerator Case
Installation Specifications
•
To use Collar Kit (PN # ECK23CDS), an enclosure is
required around Counter-Depth French Door Refrigerator
having an opening of 70-1/4" H x 36-1/8" W with
minimum cabinet side panels of 24-1/2" D x 1/2" W.
•
Minimum 24-1/2" depth requires recessed electrical
outlet and water line.
•
Add maximum of 1/4" to 70-1/4" opening height when
installed with frameless-style overhead cabinets, for
door opening clearance.
•
Cabinet or soffit above unit must extend out to same
depth as side panels.
•
To provide additional clearance for overhead cabinet
doors when in open position, allow 1" from underside
of cabinet to bottom of cabinet door.
Shown with
dispenser model
E23BC78ISS
A
C
B
/
" (B) 36
/
" (C) 24
/
" min.*
1
1
4
8
2
Recessed water line
24"
Cabinet
•
A minimum width of 36-1/8" is required for refrigerator
install ation with an additional 1/2" or 3/4" added for
each side panel.
•
If 1/2" side panels are used, then side trim piece and
panel will be even. If 3/4" side panels are used, then 1/4"
of side panel will extend beyond collar trim and must
be finished.
•
For detailed Counter-Depth French Door Refrigerator
installation, refer to Planning Information page and
installation guide on web.
26
/
"
7
8
35
/
"
5
8
23
/
5
8
(with drawer
fully extended
42
/
" (with doors
9
including handle)
16
90ϒopen)
Recessed electrical outlet
Top View
Countertop
Cabinet Side Panels
/
" min. width
1
2
69
/
"
1
2
with
/
"
3
8
rollers
68
/
"
3
16
with
3
/
"
8
rollers
"
44
/
"
1
2
25"
Hide quick links:
Advertisement
Table of Contents
