Table of Contents
Advertisement
E23CS78HPS
Counter-Depth Side-by-Side Refrigerators
Installation Specifications
•
Product Weight – 300 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing
codes.
•
When installing next to wall allow 3-1/2" handle clearance.
•
Floor should be level surface of hard material, capable
of supporting fully loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet
or other appliance that extends beyond front edge of unit,
20" minimum clearance recommended to allow for
optimum 120° to 180° door swing, providing complete
drawer / crisper access and removal. (Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which
will provide drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in
direct sunlight or close proximity to range, dishwasher
or other heat source.
•
For proper ventilation, front grille MUST remain
unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent
water line damage.
•
Water Pressure – Cold water line must provide between
30 and 100 pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water
supply line with length equal to distance from rear of unit
to household water supply line plus 7 additional feet.
Optional Water Supply Installation Kits available.
•
Adjustable front rollers to assist with door alignment.
"Built-In Look" Specifications
•
For built-in look, minimum cutout opening of 70-1/4" H x
36" W x 25" D required to allow for ease of installation,
proper air circulation, and plumbing / electrical connections.
Optional Trim Kit Specifications
For installation details refer to Project Planning Section.
•
If optional Collar Kit (PN # ECK23CDS) is to be used,
different cutout dimensions are required. (Refer to Collar
Kit ECK23CDS Installation Specifications page.)
•
If optional Louvered Trim Kit (PN # 4480) is to be used,
different cutout dimensions are required. (Refer to
Louvered Trim Kit 4480 Installation Specifications page.)
•
Remove all wall / floor molding prior to installation.
e l e c t ro l u x i c o n . c o m
planning
information
For models:
E23CS78HPS
E23CS78HSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Installation drawing shown
with professional series model.
Optional
Accessories
Collar Kit
PN # ECK23CDS
Includes side and
top trim pieces.
Louvered Trim Kit
PN # 4480
Includes louvered
top grille, side and
top trim pieces.
®
PureAdvantage
Water Filter Replacement
Cartridge
PN # EWF01
®
PureAdvantage
Air Filter Replacement
Cartridge
PN # EAFCBF
117
Hide quick links:
Advertisement
Table of Contents
