Complete Installation - Whirlpool W7WCC085XB0 Use & Care Manual

Attach Side Curtains to Windowsill--Side Curtain
Bracket (on some models)
1. Slide the side bracket over the bottom of the right-hand
curtain frame.
2. Use 1/8"drill bit to drill a starter hole through the hole in the
side bracket and into the windowsill.
3. Using a 3/4"screw, attach the side bracket to the windowsill.
3=
Attach the top channel to the window sash with a 3/4"screw to
secure the window.
4. Place the window lock bracket as shown. Use a 1/8"drill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
5. Attach the window lock bracket to the upper window with
one 31/32" screw to secure the window in place.
A
4=
1=
2=
Repeat for side bracket installation on the left-hand side of
the air conditioner.
Insert the foam seal without adhesive strip behind the top of
the lower window sash and against the glass of the upper
window.
A. Top of lower window sash
B. Foam seal
Use %" drill bit to drill a starter hole through the hole in the
top channel and into the window sash.
A. Window lock bracket
B. Upper window
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
6. Plug into a grounded 3 prong outlet.
7. Press RESET on the power supply cord. See "Electrical
Requirements."
8. Remove the clear plastic film from the control panel and
plastic front.
12