Complete Installation - Whirlpool ACE082PT1 Use & Care Manual

NOTE: Handle the air conditioner gently. Position the ground wire pointing straight up. Put the excess
1. Make sure the free end of the ground wire is outside of the ground wire between the coil and the air conditioner cabinet.
cabinet.
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
2. Insert the air conditioner into the cabinet.
NOTE: Make sure the free end of the ground wire is outside
of the cabinet.
A. Green ground wire
B. Ground screw
4. Insert the front tabs of the front panel into the top of the
cabinet and swing the front into place.
5. Attach the bottom front of the panel with the front panel
screws. Replace the control knobs (on some models).
t A
A, Ground wire outside of the cabinet
Electrical Shock Hazard
Connect green ground wire to ground screw.
Failure to do so can result in death or electrical shock.
NOTE: For through-the-wall installations, if needed, install
molding around the room side of the cabinet.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect the green ground wire to the ground screw.
6. Plug into a grounded 3 prong outlet.
7. Press RESET on the power supply cord. See "Electrical
Requirements."
10