Complete Installation - Whirlpool ACE184XS0 Use & Care Manual

3=
Use a level to check that cabinet is level side to side.
A. Level
4.
5.
6.
7.
Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
Reuse the insulation to seal opening between cabinet and
frame.
Use existing holes in sides and top of cabinet and 7 - #10 x
1" wood screws (not provided) to attach cabinet to frame.
NOTE: Do not overtighten screws or cabinet will distort and
provide a poor air seal between cabinet and air conditioner.
Caulk all outside wall openings around cabinet,
Peel paper from adhesive backing on the 2W' (6.4 cm) seal
strip. Place the 2W' (6.4 cm) seal strip inside the cabinet.
Make seal flush with cabinet front edge.
NOTE: This seal strip fits between the air conditioner base
and the cabinet.
I
A. 2 _" seal s trip
NOTE: Handle air conditioner gently.
2. Peel paper from adhesive backing on one of the 2 short air
conditioner seals. Align left-side air conditioner seal against
metal flange behind control box. Attach long, top air
conditioner seal over seam in top of air condtioner and right-
side air conditioner seal so they align with left seal.
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
4. Insert air conditioner into cabinet,
3=
B
A. Long, top air conditioner seal
B. Short left-side air conditioner seal
Make sure the free end of the ground wire is outside of the
cabinet,
A. Make sure the free end of the ground wire
is outside of the cabinet.
Electrical Shock Hazard
Connect green ground wire to ground screw,
Failure to do so can result in death or electrical shock.
5. Connect green ground wire to cabinet base with ground
screw.
10