Download Table of Contents Print this page

Whirlpool 3QACM07XD2 Owner's Manual

Whirlpool room air conditioners owner's manual
Go to 3QACM07XD2 Specifications


Quick Links


Table of Contents

Summary of Contents for Whirlpool 3QACM07XD2

  • Page 1: Table Of Contents

    Owher’s ROOM AIR CONDITIONERS Note to You Important Safety Instructions Parts and Features Operating Your Air Conditioner Personalizing the Front Panel Caring for Your Air Conditioner Installing Your Air Conditioner Troubleshooting Obtaining Service Part No. 1161126...
  • Page 2: Note To You

    A Note to You Thank buying a Whirlpool* You purchased a quality, world-class home appliance. Years of engineering into its manufacture. To ensure you operate and care for your appliance properly, we devel- oped this Owner’s Manual. It is full of valuable information on how to operate and maintain your appliance properly and safely.
  • Page 3: Important Safety Instructions

    Important Safety Read all instructions before using your air conditioner. Complete the installation requirements as described in “Installing Your Air Conditioner” on pages 1 O-l 3. Do not allow children to operate or play with the air conditioner. Do not use an extension cord with this or any other appliance.
  • Page 4: Parts And Features

    Parts and Features This section contains captioned illustrations become familiar with where the parts and features are located and what they look like. conditioner Outside air intake Exhaust door louvers control Model and serw panel Control number label of your air conditioner. Please use them to Air output Protective...
  • Page 5: Operating Your Air Conditioner

    Operating Your Air Conditioner In This Section Turning the air conditioner on/off ..,j Modifying the fan speed .._... 5 Modifying the temperature .._... 6 Operating your air conditioner properly is essential to obtain the best possible results.
  • Page 6 Modifying the temperature Set the TEMP Control to your desired setting. Turn clockwise for more cooling. Turn counterclockwise for less cooling. You will need to experiment to find the setting which suits you best. Using the FAN ONLY The FAN ONLY Cycle circulates the room air without cooling it.
  • Page 7: Personalizing The Front Panel

    Personalizing Front Panel (available on select models) The appearance of the front panel can be customized to suit your tastes or to match the room. The panel has a clear, protective plastic cover that you can remove. Then, place wallpaper, fabric, pictures, etc., in the open area and replace the protective cover. Removing the protective 1.
  • Page 8: Caring For Your Air Conditioner

    Proper maintenance of your air conditioner This section tells you how to clean your air conditioner and perform general maintenance. You can always call an authorized Whirlpool* service company for annual service. Caring for the control Wipe clean with a soft, damp cloth. Make sure the cloth is not dripping wet.
  • Page 9 Caring for the slide-out The air filter helps remove dust, lint, and other particles from the air. The air filter is cleanable. Check the air filter every few weeks to see if it needs cleaning. 1. Grasp the bottom edge of the front panel with both hands, as shown.
  • Page 10: Air Conditioner

    Installing Your Air Conditioner In This Section General information ..,...,..._._,,.,..._ I IJ General information Location Your air conditioner will work well in any location. However, the preferred location for the unit is on a wall out of direct sunlight. The location should also provide: 9 Adequate support for the weight of the unit.
  • Page 11 * Provide adequate drainage. outside unit drains to the rear. 5tolOmm . Provide additional support for unit if required. * Provide adequate clearance so the air filter can be removed from the bottom of the front panel. Must be able to remove air filter Electrical...
  • Page 12 Installation procedure 1. Remove the front panel. Remove tape (if any). Lift panel and take it off the cabinet. 2. Remove the shipping brackets (2). Remove the cabinet ground screw (1) and disconnect the green and yellow grounding wire. 3. Remove the rear shipping screws (2). 4.
  • Page 13 Slide the chassis into the cabinet. Install the cabinet seal (accessory part) between the cabinet and the frame/wall. 8. Reinstall the shipping bracket and attach with screws (2). 9. Reconnect the green and yellow grounding wire. Electrical Shock Hazard Connect ground wire when unit is in cabinet.
  • Page 14: Troubleshooting

    . . . Contact the dealer from whom you pur- chased the unit, an authorized Whirlpool* service company, or refer to the guarantee booklet included with your product. ’ Registered POSSIBLE SOLUTION Trademah 01 Whwlpool.

Table of Contents