Ospf Host Route Settings - D-Link DES-3326SRM - Switch - Stackable Product Manual

OSPF Host Route Settings

OSPF host routes work in a way analogous to RIP, only this is used to share OSPF information with other OSPF routers. This
is used to work around problems that might prevent OSPF information sharing between routers.
To configure OSPF host routes, click the OSPF Host Route Settings link. To add a new OSPF Route, click the New button.
Configure the setting in the menu that appears.
To add a OSPF Host Route on the switch, click the New button:
Specify the host route settings and click the Apply button to add or change the settings. The new settings will appear listed in
the OSPF Host Route Settings list.
The following fields for OSPF host route can be set or are displayed::
Parameter
Host Address
Metric
Area ID
D-Link DES-3326S Layer 3 Switch
Figure 24- 14. OSPF Host Route Settings
Figure 24- 15. OSPF Host Route Settings − Add
Description
The IP address of the OSPF host.
A value between 1 and 65,535 that will be advertised for the route.
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies
the OSPF area in the OSPF domain.
183