D-Link DES-3326SRM - Switch - Stackable Product Manual page 107

Initialize Ports
Use this to initialize the 802.1x functions on specified ports or for specified MAC addresses operating from a specified range
of ports.
The Initialize Ports settings are as follows:
Parameter
Port
Configure Ports from __ to __
MAC Address
D-Link DES-3326S Layer 3 Switch
Figure 14- 22. Initialize Ports
Description
Select the port or lowest number of the group of ports being configured.
A consecutive groups of ports may be configured starting with the selected
port.
Specify the MAC address to add to the list for MAC based 802.1x
initialization. Click the option box to insert a check mark before typing in the
MAC address. This option can only be used if the authorization is MAC-
based.
97