D-Link DES-3326SRM - Switch - Stackable Product Manual page 87

The following parameters can set:
Parameter
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
from GMT in +/-
HH:MM
DST Repeating
Settings
From: Which Day
From: Day of Week
From: Month
From: time in HH:MM
To: Which Day
To: Day of Week
To: Month
To: time in HH:MM
Annual Settings
From: Month
From: Day
From: time in HH:MM
To: Month
To: Day
To: time in HH:MM
D-Link DES-3326S Layer 3 Switch
Description
Use this pull-down menu to Enable or Disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset − 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
Repeating - Using repeating mode will enable DST seasonal time adjustment. Repeating
mode requires that the DST beginning and ending date be specified using a formula. For
example, specify to begin DST on Saturday during the second week of April and end
DST on Sunday during the last week of October.
Should be From: Which Week. Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
Should be be To: Which Week. Enter the week of the month the DST will end.
Enter the day of the week that DST will end.
Enter the month that DST will end.
Enter the time DST will end.
Annual - Using annual mode will enable DST seasonal time adjustment. Annual mode
requires that the DST beginning and ending date be specified concisely. For example,
specify to begin DST on April 3 and end DST on October 14.
Enter the month DST will start on, each year.
Enter the day of the week DST will start on, each year.
Enter the time of day DST will start on, each year.
Enter the month DST will end on, each year.
Enter the day of the week DST will end on, each year.
Enter the time of day that DST will end on, each year.
77