D-Link DES-3326SRM - Switch - Stackable Product Manual page 63

D-Link DES-3326S Layer 3 Switch
Configure the Link Aggregation Groups
Follow the instructions below to set up Link Aggregation on the Switch.
To configure a link aggregation group, click on the Link Aggregation link from the Advanced Setup folder:
Figure 6- 2. Link Aggregation
Any Link Aggregation groups configured will appear listed in the table. To remove a group, select the group from the table and
click on the Delete button.
To create a new Link Aggregation group, click the New button:
Figure 6- 3. Link Aggregation − New
Click to select the ports in the group. Up to six ports may be selected for each group. Configure the parameters for the group
and click on the Apply button to create the group. See the table below for a description of the parameters used for the Link
Aggregation group.
53