Security Management; Access Profile Configuration - D-Link DES-3326SRM - Switch - Stackable Product Manual

24-port layer 3 stackable switch
Hide thumbs Also See for DES-3326SRM - Switch - Stackable:
Table of Contents

Advertisement

Security Management

Access Profile Configuration

CPU Interface Filtering
802.1X Port-based Network Access Control
802.1X Configuration
Various security mechanisms are available with the DES-3326S including those discussed in this chapter. Other techniques are
used to improve the security environment that are not included in this chapter but are discussed in other chapters. This chapter
is dedicated to setting up Access Profiles and 802.1X configuration.
Access Profile Configuration
Access profiles allow you to establish criteria to determine if the Switch will forward packets based on the information
contained in each packet's header. These criteria can be specified on a basis of VLAN, MAC address or IP address. First,
create the Access Profile Mask, then, define the rules used to allow access.
Access Profile Mask
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the switch will
examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the switch will
use to determine what to do with the frame. The entire process is described below in two parts.
To create an Access Profile Mask:
Click the New button in the Access Profile Mask Setting summary table page. A new menu is displayed. Use this to create an
access profile and specify what criteria are used to examine frames. Once the profile has been created you can set up the rule
applied to the profile as described later in this section.
D-Link DES-3326S Layer 3 Switch
Figure 14- 1. Access Profile Mask Setting Table
Chapter 14
78

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3326s

Table of Contents