Using The Layout Options - Xerox WorkCentre 3550 User Manual

Using the Layout Options

This option is used to copy multiple documents onto one sheet of paper, copy from book originals, create booklet
output and produce documents which can be pasted together to make a poster.
2 Up or 4 Up Copying
This feature is used to copy two or more documents, in a reduced
size, onto one sheet of paper. It is ideal for creating handouts,
storyboards or documents used for archival purposes.
Note: Originals must be loaded in the document feeder when
using this feature.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrows to highlight Layout and press OK.
4. Select the option required:
• Normal: Copies an original onto one sheet of paper.
• 2 Up: Copies two separate originals onto one sheet of paper.
• 4 Up: Copies four separate originals onto one sheet of paper.
Note: For landscape originals, place the top of the document at the back of the feeder. For portrait
originals, place the top of the document to the left.
5. Select OK to save your selections and press Menu to return to the top level menu.
6. Load originals and press Start.
ID Card Copy
The machine prints one side of the original on the upper half of
the paper and the other side on the lower half without reducing
the size of the original. This feature is helpful for copying a small-
sized item, such as a business card.
Note: This copy feature is available only when you place
originals on the document glass. If the original is larger than
the printable area, some portions may not be printed.
Your machine can print 2 sided originals on one sheet of A4,
Letter, Legal, Folio, Executive, B5, A5, or A6 paper.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrows to highlight Layout and press OK.
4. Press the up/down arrows to highlight ID Card Copy and press OK.
5. Press Menu to return to the top level menu.

Using the Layout Options

1 2
3 4
Xerox WorkCentre 3550
User Guide
31