Xerox WorkCentre 3550 User Manual page 30

Copy Options
Feature
Layout This option is used to copy
multiple documents onto
one sheet of paper, copy
from book originals, create
booklet output and
produce documents which
can be pasted together to
make a poster.
Collation Collation is used to select
collated or uncollated
output.
Original Size Allows you to specify the
size of the image to be
scanned.
30 Xerox WorkCentre 3550
User Guide
Description
• Normal: Select this option to match the layout of the
• 2 Up: This feature is used to copy two documents, in a
• 4 Up: This feature is used to copy four documents, in a
• ID Card Copy: The machine prints one side of the
• Book Copy: Use when copying bound documents and
• Booklet Creation: This allows you to print your
• Poster Copy: Your original will be divided into 9
• Clone Copy: The machine prints multiple original
Refer to
instructions.
• Collated: Select Collated for output stacked in sets to
• Uncollated: Select Uncollated for output sorted into
• A4
• A5
• B5
• Letter
• Legal
• Executive
• Folio
• Oficio
Options
originals.
reduced size, onto one sheet of paper.
reduced size, onto one sheet of paper.
original on the upper half of the paper and the other
side on the lower half without reducing the size of the
original.
books.
document on both sides of the paper and arranges
the pages so that the paper can be folded in half after
printing to produce a booklet.
portions. You can paste the printed pages together to
make one poster-sized document.
images onto a single page. The number of images is
automatically determined by the machine based on
the original size and the paper size.
Using the Layout Options
match the sequence of the originals, i.e. (1,2,3 / 1,2,3).
stacks of individual pages, i.e. (1,1,1 / 2,2,2 / 3,3,3).
on page 31 for