Machine Status Menu; Accessing The Setup Options - Xerox WorkCentre 3550 User Manual

Machine Status Menu

Machine Status Menu

All the machine setup features are accessed through the Machine Status button on the control panel.
The setup and default options should be setup and customized by the System Administrator. Therefore
access to these options is passcode protected.

Accessing the Setup Options

To access the default and setup options:
1. Press the Machine Status button on the Control Panel.
2. Press the up/down arrow buttons to highlight the required
option. Press OK.
3. Enter the Administrator's Password using the keypad. The
default is 1111.
Note: You may have to press the 1 key several times to enter
the '1'.
After entering a character press the Right arrow button to
enable the next character to be entered, or wait 2 seconds between presses.
Continue entering characters until the full password has been entered.
4. Press the OK button on the Control Panel. Once the password is verified the selected option menu
displays.
Settings can also be customized using CentreWare Internet Services, refer to the
Guide for more information.
The following options are accessible from the Machine Status menu:
Feature
Machine Information
Toner Level
128 Xerox WorkCentre 3550
User Guide
Option
Model
Printer Name
DNS Name
IP Address
Serial Number
Activation Date
Billing Counters
The level of toner remaining is indicated on the status bar.
Option Settings
• Total Impressions
• Black Impressions
• Maint. Impressions
System Administrator
• Sheets
• 2 Sided Sheets