Xerox WorkCentre 3550 User Manual page 47

destinations, for example after the transmission to destination A ends and before the transmission to
destination B begins, or between redial attempts.
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrows to highlight Priority Send and press OK.
4. Enter the number of the receiving fax machine and press OK.
You can select speed dial numbers or a group dial number using the Address book button. For
details, see Address Book
5. Enter the job name you want and press OK. If you do not want to assign a name, skip this step.
For details on how to enter alphanumeric characters, refer to
6. Load originals and press Start.
If an original is placed on the document glass, select Yes to add another page. Load another
original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine scans and sends the fax to the destinations entered.
on page 51.
Using Fax Send Options
Using the Keypad on page 13.
Xerox WorkCentre 3550
User Guide
47