Function Reference; Genelec Autocal; Se7261A Online - Genelec SE Operating Manual

Small enviroment system
Table of Contents

Advertisement

FUNCTION REFERENCE

This section describes individual functions in detail. Functions are presented in alphabetical order.

Genelec AutoCal™

Genelec AutoCal™ performs automatic calibration of a multi loudspeaker system setup. It aligns every
loudspeaker in the setup for flat frequency response, equal virtual distance and the same sound pressure
level.
In order to use Genelec AutoCal™
A Genelec 8200A Calibration Microphone must be set up at the main listening position.
The microphone must be connected to the GLM Network Interface device
The GLM Network Interface device must be connected to the loudspeaker control network cable,
8200A measurement microphone, computer USB port, and sound card line input port in the
computer
Genelec AutoCal™ is accessible in the System Setup Wizard and in the Setup Tab in the GLM.SE™ main
window. (Menu path: Setup | GLM.SE™ Acoustic Wizard | AutoCal™).
Launch Genelec AutoCal™ by clicking the "Yes" button. After that, Genelec AutoCal™ works automatically
and without user intervention. One loudspeaker at a time will produce a sweep tone, starting with the
SE7261A. The sweep responses are recorded by Genelec AutoCal™. After that, Genelec AutoCal™
takes some time to calculate the appropriate settings for each loudspeaker in the system, and stores
the resulting settings in the System Setup file. The progress indicated in the Genelec AutoCal™ window.
The total amount of time Genelec AutoCal™ takes to calibrate the system depends on the number of
loudspeakers in the system.
For a presentation about the use of Genelec AutoCal™ see section "Genelec AutoCal™ - Automatic
System Calibration" in the System Operating Manual.

SE7261A Online

This window appears when first starting GLM.SE™. It verifies the status of the SE7261A currently on the
Genelec Control Network. If the SE7261A is not recognized check that the power switch is ON and the
subwoofer is connected to the network. If the total length of the control network is more than 300 meters
(900 feet), contact the Genelec distributor for more information.
98

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se7261a8130a

Table of Contents