After the settings are recalled GLM.SE™ will show the GLM.SE™ master level that was used when
the acoustic settings were stored. Also the amount of the Video Delay Compensation stored will be
displayed.
System Audio Connections
The System Audio Connections window presents a summary of the audio channel definitions created and
loudspeakers associated with each audio channel.
Manual Cabling
This System Audio Connections window is displayed when the Manual Cabling option is run with the
System Setup Wizard.
The letters [BM] appear after an audio channel name if the channel is bass managed. The letters [LFE]
will appear after an audio channel name if the audio channel has been assigned to reproduce a Low
Frequency Effects channel (LFE channel).
Verify that the information is correct. Use the Back button to reverse through the Cabling Wizard to a point
where necessary corrections are required. When the information is correct, click "Next" to accept the
105