Configurable settings for Powermate knob
Powermate functions can be disabled/enabled as desired in each individual Setup file. For example
bypass function can be disabled to avoid unwanted bypass. These functions can be edited by opening a
config window from the main menu (Setup->Configure Powermate Controls).
When unselecting a function and clicking the OK button, the new configuration will be saved and used in
the saved Setup file.
GLM.SE™ AutoLink Application
GLM.SE™ AutoLink is a stand-alone application that can be used to communicate with GLM.SE™ via different
shortcut key combinations. The operations that can be done via GLM.SE™ AutoLink application are:
•
Load setup files
•
Increase level
•
Decrease level
•
System Mute
GLM AutoLink shortcuts allow changing the system level or loading setups if GLM.SE™ is not active
(running on the background).
Tips for GLM.SE™ AutoLink use
Windows:
GLM.SE™ AutoLink can be launched from c:\Program Files\Genelec\GLM SE\GLM_SE_AutoLink.exe.
To launch GLM.SE™ AutoLink application at system startup, drag'n'drop GLM_SE_AutoLink.exe into
Startup folder in Windows Start menu.
115