Table of Contents
Advertisement
•
Use a sound level meter to obtain a reading of the sound pressure level at the primary listening
position.
•
Enter the obtained value into the "Sound Pressure Level at the Primary Listening Position" box.
•
Click "OK" to save the setting and to complete calibration and return to the GLM.SE™ Main
Page.
Uninstalling GLM.SE™
Windows
GLM.SE™ uninstaller can be launched from Start menu by clicking 'Uninstall GLM.SE™'.
This removes GLM.SE™ application from the system. If GLM.SE™ and GLM.SE™ Autolink are running,
close them before launching the uninstaller.
Macintosh
The following steps should be followed to delete the complete installation of GLM.SE™. Close GLM.SE™
and GLM.SE™ Autolink applications if running, before starting the uninstallation.
Step 1: Remove the following folders and contents created by GLM.SE™
a) /Library/Application Support/Genelec/GLM_SE
b) /Applications/Genelec/GLM_SE
c) ~/Library/Application Support/Genelec/GLM_SE
d) ~/Documents/Genelec/GLM_SE (Note: Do not delete if you want to keep old setup files)
Folders deleted in task c) and d) need to be deleted from all users separately.
Step 2: Remove GLM SE and Library packages (GLM_SE.pkg and DSP_Applications_SE.pkg) from the
system, located at /Library/Receipts.
Step 3: Remove the GLM.SE™ icon from the Dock (delete from all users separately)
The GLM.SE™ Autolink application can be removed from the Menu bar by removing the application from
the login items (Note: close GLM.SE™ Autolink application first).
a) Open system preferences
b) Go to Accounts and select an account from which GLM.SE™ Autolink application needs to be
removed.
c) Delete the GLM.SE™ Autolink from the Login Item list.
Delete the GLM.SE™ Autolink application from the /Application/Genelec/GLM_SE to delete it completely.
114
Advertisement
Table of Contents
