Table of Contents
Advertisement
EDITING ACOUSTIC CALIBRATIONS
The GLM.SE™ software contains a versatile set of controls to edit the acoustic setup of a loudspeaker
or subwoofer. Changing these acoustical controls is strongly discouraged unless there is access to a
properly set up professional acoustic measurement system, for example, MLSSA or WinMLS. Adjusting
the acoustic calibration "by ear" will most likely result in a degradation of audio quality.
Opening the Acoustical Settings Editor
The Acoustical Settings Editor can be accessed as follows:
•
In the GLM.SE™ main window, click the "GLM.SE™ System Setup" button, or select the menu
item "Setup | GLM.SE™ System Setup".
•
Now select a loudspeaker in the "Loudspeakers (Online)" panel seen in the lower half of the
System Setup window.
•
Click the "Edit Acoustic Settings" button or double click on loudspeaker (loudspeaker
column) and the "Acoustical Setup" will open for that loudspeaker. Note that the appearance of
the Acoustical Setup Editor window depends on the loudspeaker type.
76
Advertisement
Table of Contents
