Table of Contents
Advertisement
Installing the GLM.SE™ Software
Windows
Insert the software CD in the CD-ROM drive. The installation application will open automatically (if autorun
is disabled then the Install.exe file must be manually launched from the CD). Click 'Install GLM.SE™
software' button to launch the installation. To finish the installation the system needs to be restarted.
Macintosh
Open GLM.SE™ CD with Finder and select the software version that matches the OS X version (Panther,
Tiger, or Leopard) to be used and launch that package. To finish the installation the system will be restarted.
Macintosh installation package will always install X11 application from the CD. If X11 application already
exists in the system, use customized installation type to remove X11 from the installation task.
Running the System Setup Wizard
The System Setup Wizard is a self-guiding program designed to make the installation process easy and
complete. The basic flow of setting up the system is detailed below. Consult the sections of this manual
mentioned in each step for further details. Before running the System Setup Wizard, make sure that all
audio source equipment output levels are turned down.
•
Position the 8130A loudspeakers. See the "Loudspeaker Placement" section for details.
•
Find the Genelec Control Network cable in the SE7261A delivery box. Connect the control
network. See the "Genelec control network cabling" section for details.
•
Find the Network Interface Device and follow cabling instructions. See the "Network Interface
Device" section for details.
•
Find the software CD in the Genelec Loudspeaker Manager package, insert it in computer and
follow on-screen instructions to install Genelec Loudspeaker Manager GLM.SE™ on the
computer. See the "GLM.SE™ Genelec Loudspeaker Manager" section for details.
•
Label and connect the audio cables. See the "Audio Cabling" section for details.
•
Launch the GLM.SE™, then follow the on-screen instructions to complete a System Setup.
Select either Rapid Cabling Mode or Manual Cabling Mode and follow the instructions.
•
If there is no applicable Rapid Cabling Preset, select the Manual Cabling Wizard. See the
"Manual Audio Cabling" section for details. Plan all cabling according to the guidelines provided.
Plan channel labeling and loudspeaker labeling and launch the Manual Cabling Wizard.
•
To acoustically align the system, run the Acoustic Setup Wizard in the GLM.SE™. See the
"Acoustic Setup Wizard" section for details.
•
Use the fully automated alignment system AutoCal™ built into the Acoustic Setup Wizard.
•
Finally Save the System Setup and study the basic use of the GLM.SE™.
29
Advertisement
Table of Contents
