Software - Genelec SE Operating Manual

How do I connect the audio cables to a system with a subwoofer?
First connect the audio cables to the subwoofer and then continue on to the loudspeakers.

Software

Can I install the GLM.SE™ on another PC and use the program on both computers?
The GLM.SE™ Loudspeaker Manager comes with a site license, which means you can install the software
on as many computers as you like within a facility. Additional GLM Network Interfaces can be purchased
(GLM Multiroom Expansion Package) to allow GLM Network Control in more than one room.
My soundcard doesn't work with AutoCal™, what are you going to do about it?
We have tested AutoCal™ on many computers but it is impossible to test every computer available today.
Please report any soundcard problems back to Genelec so the measurement part of the software can be
made even more robust in the future. In the short term, try installing the software onto another computer
to see if the problem is with the computer or the network and loudspeakers. If problem remains, please
contact your country specific distributor for product servicing and support.
AutoCal™ can be run on another computer and the System Setup files copied to the "not working"
computer:
• Go to the installation directory of the GLM.SE™ software. The GLM.SE™ software installation
directory is typically C:/Program Files/Genelec/GLM SE. Go the subdirectory "Setup Files".
• Find a subdirectory with the same name as the system calibration you want to copy. It is
appended with the text "_AutoCal™". For example, your system setup is called
"MySystemSetup". Then, the directory is called "MySystemSetup_AutoCal™". Copy this directory
to the other computer.
• Find the System Setup file which has the name of your System Setup and the file name
extension ".GSE". For example, your system setup is called "MySystemSetup". Then, the system
setup file is called "MySystemSetup.gse". Copy this file to the other computer.
How often should I upgrade the software of the DSP? Should I pay for the new version?
Software updates and upgrades will be clearly announced on the web site, www.genelec.com.
Can I upgrade the software via the web?
There will be a download page on the Genelec website, www.genelec.com.
How do I make settings for different positions in the room and switch between them?
AutoCal™ can be performed for different locations in the room, for example engineer's position and
122